silent knight 6815 alarm fire alarm

6815

silent knight 6815 alarm:

FEATURES silent knight 6815 alarm:

• The number of 6815 SLCs that can be used in one system is
largely determined by maximum point counts. With 1,110
available points on the 6820 and 6820EVS and 6815 SLC
flexibility, new design and installation opportunities are now possible.
• Use the 5815RMK mounting kit to securely house more SLCs within one system.
• Pair with the separate 6860 remote annunciator for additional installation
and operating options. The 6860 has four programmable
buttons that are useful for executing routine or complex tasks.
• Up to two additional 6815 SLCs can be
securely housed in one FACP, thus limiting the need for separate housing
• Useful for installations where buildings are connected for
multi-site benefits using fiber optic or copper wiring. The ability to use multiple
6815 SLCs in these situations provides additional fire system design options.

Download Data Sheet: _6815

Related Products:

500 Series Multiple Input and Output ModulesASM-16 Addressable Switch Module
DS-DB Digital Series Distribution Board
CP1C module.
DXc System IO Card Interface
Extension modules IQ8Control
Fault Isolator
Fire Brigade Indication Panel
Notifier Loop Control Module
MMO-6SF Multi-Mod – 6 Signal Output
SK-Control-6 Six Circuit Supervised Control Module

Brand	Honeywell

The 6815 is a signaling line circuit (SLC) expander for use with Honeywell
Silent Knight 6820 or 6820EVS fire alarm control panels (FACPs)using
System Sensor® (SK) protocol. The 6815 signaling circuit has the same
functionality as the SLC that is built into the 6820 and 6820EVS panels
and support the same addressable devices as the one in each panel. The
number of 6815 SLCs that can be used within one system is largely
dependent on maximum available points. They provide a powerful way to
customize configurations in large or complex installs.
The 6820 and 6820EVS panels support up to 1,110 maximum points and
come with one integrated SLC. Each added 6815 can support an
additional 159 SK devices, and 159 SK modules.
The 6815 can also be used for SWIFT® wireless detection. SWIFT wireless
devices communicate with the FACP through a gateway (WSK-WGI) that
connects to the SLC using SK protocol. The integrated SLC, or a 6815 SLC,
can be used for this purpose. SWIFT devices can also be combined with
hard-wired devices on the same SLC for additional versatility. The result is
more flexibility and design options when hard-wire solutions are
problematic.
The 6815 communicates with the FACP via an RS 485 system bus. A green
LED on the 6815 board blinks to indicate good communication. If an
addressable device on a 6815 fails, the loop communicates the failure to
the 6820 and 6820EVS and continues to operate normally

6815 Technical Specifications

PHYSICAL
Dimensions: 4.2″H x 4.8″W (10.7 x 12.2 cm)
Shipping Weight: 5.6oz (159g)
ELECTRICAL
Standby & Alarm Current: 78mA max
ENVIRONMENTAL
Operating Temperature: 32°F to 120°F (0°C to
49°C)
Humidity: 0 to 93% non-condensing
SYSTEM CAPACITY
6815 Capacity: 159 SK sensors and 159 SK
modules per loop
The maximum 1,110 point count for the 6820 and
6820EVS, and related support requirements, limit
the number of 6815 SLCs that can be added to a
fire system installation.
ORDERING INFORMATION
6815: Signaling Line Circuit Expander.

ACCESSORIES
5895XL: Intelligent Power Module. Cabinet holds
two 6815s.
5815RMK: Remote Mounting Kit Cabinet holds two
6815s. Red.
AGENCY LISTINGS AND APPROVALS
UL listed
CSFM approved 7165-0559:0500
Meets NFPA 72 requirements
FM approved
FDNY COA (pending)
COMPATIBILITY
• 6820: Addressable fire alarm control panel
with up to 1,110 addressable points
• 6820EVS: Addressable fire alarm control panel
with an emergency voice system, up to 1,110
addressable points
*Hochiki® (SD) devices utilize the 5815XL
signaling line circuit (SLC).