Above showing the printed circuit board detail and below showing the board in the case.
L7700 IP Power Supply Controller LCD Screen.
The on-board LCD screen, together with the Menu and OK buttons provides access to essential Local Area Network
and Power Supply status, together with control over the basic settings of the IP controller. In quiescent condition, the
LCD Displays INTERCALL IP and the date and time, to scroll through the menu screens, press the Menu button to
activate one of the settings press the Select/OK button.
L7700 Revert to Factory Defaults.
The IP16 can be reverted to factory defaults switching the unit on while holding down the Menu button, the following
screens will appear on the LCD screen. If a new disk is inserted, the IP16 will automatically go through this process, in
which case you must press OK to the first two screens but you may retain the current LAN settings.
L7700 IP Power Supply Controller Connections.
You can make a simply one–to– one connection with your laptop computer using a Ethernet cross-over cable. This will
allow access to the on-board web pages for system configuration. No special software is required; access is via a
standard web browser such as Internet Explorer or Firefox. To make a one-to-one connection with your laptop, you
may need to alter the IP settings on your laptop and set a manual IP Address. More information is contained within
the L7700 manual and there is much information on the internet on how to set a manual IP address on your laptop.
