The Eaton CF2000 is an entry level intelligent
addressable control panel which can be configured for
either 1 or 2 loop operation, and is certified to EN54
parts 2 & 4.
The panel has a graphic display, providing a simple
menu driven end user interface. With the CF2000’s
ability to support Eaton cause and effect programming
and a range of user controllable functions it makes the
panel suitable for a varied range of projects from small
warehouses to small/medium office developments as
well as many small industrial applications.
As with all Eaton intelligent addressable panels, the
CF2000 uses “spur tolerant” soft addressing to
minimise installation time and remove the potential
for errors often associated with many forms of manual
addressing.
Technical specification
Dimensions
Installation
The CF2000 has been designed with ease of installation as a major
objective.
The panel back box can be surface mounted with cable entry points to
both the top and rear. The mother board and integrated power supply
are mounted on a sub chassis which is easily removed to aid panel
fitting.
Back box mounting is further assisted with the provision of a drill
template allowing the mounting screw holes to be pre-drilled and the
top two mounting screws fitted prior to final positioning of the back
box.
Ample room is provided within the back box for the termination of
external cables and bonding of cable screen wires.
System con
The CF2000 can be configured to operate as a 1 or 2 loop panel.
Using Eaton system protocol the panel “auto learns” the equipment
mounted on the loop(s) and “soft addresses” each item, ensuring a
simple setup procedure and reducing the time required for system
setup.
All loop mounted equipment has integral short circuit isolators,
ensuring loop integrity is maintained should a short circuit fault occur
on the loop.
A comprehensive range of interface units are available and compatible
with the CF2000.
Standard panel connections
Catalogue numbers
