MPA2 enables users to securely manage their system anywhere there’s an Ethernet/Internet connection—with no dedicated PC or software costs. The user-friendly design (Push-in connectors and RJ45 ‘Click ‘n Done’ approach) makes it simple to install and easy to operate and maintain.
MPA2 gives you all the benefits of traditional access control, such as helping you secure doors, manage employee access, and manage sites remotely. It also lets you pull reports easily to meet compliance requirements. With a browser-based interface, your learning curve and training times are significantly decreased. No dedicated software is required—simply log on and you’re ready to go, securely—from the office or anywhere. You can manage MPA2 using the embedded browser, MAXPRO® Cloud’s secure cloud infrastructure, or WIN-PAK®’s integrated security suite.
MPA2 has been developed with an installer-friendly design that easily adapts to existing IT infrastructure and methods, reducing installation and support costs. So as your system grows, MPA2 grows with you.
FEATURES AND BENEFITS
MPA2 ENCLOSURE OPTIONS
MPA2 Compact All-in Smart Control Panel (MPA2C1)
MPA2 Standard Metal Enclosure MPA2 Compact Plastic Enclosure*
MPA2 SYSTEM OVERVIEW
Door Connections (RJ45 or Push-in connectors)
Reader Connections (Wiegand/OSDP – RJ45)
MPA2 ACCESS CONTROL PANEL
- RS-485 Panel Loop: A total of 9 (8+1) MPA2 (Version 1.0.3.37 or higher) and NetAXS123 (Version 6.01.12 or higher). Panels may be combined in a Controller Loop for a maximum of 123 Doors. NetAXS-4 Panels cannot be used with an EVL.
- When mixing MPA2 and NetAXS123 Controllers, MPA2 must be the Primary Panel and the Panel Loop must be RS-485.
- 4 Door Licensed. When using WIN-PAK(r), this feature may have limitations. See also MPA2 Reader/Door Configurations table concerning the limitations using Wiegand readers not supporting Hold A/B lines.
(4) USA Only
MPA2 ACCESS CONTROL PANEL
- Software compatibility for MPA2: All MPA2 versions programmed as NetAXS123; WIN-PAK® SE; WIN-PAK® PE; WIN-PAK® PRO CS; WIN-PAK® CS 4.80 or greater.
- RS-485 panel loop: A total of 9 (8+1) MPA2 (version 1.0.3.37 or higher) and NetAXS123 (version 3.04.15 or higher) panels may be combined in a controller loop. NetAXS-4 panels cannot be used with an EVL.
- When mixing MPA2 and NetAXS123 controllers, MPA2 must be the Primary panel and the panel loop must be RS-485.
- When using WIN-PAK® software, this feature may have limitations.
- Suitable for handling the 75-bit transparent card format of PIV, TWIC, and FRAC cards.
MPA2 ACCESS CONTROL PANEL
