The IFP-75 (red) and IFP-75B (black) are intelligent addressable fire
alarm control panels (FACP)-BOE-BSF-EJSFDU-SFQMBDFNFOUT-GPS-UIF-*’1—
‘”$1. 5IF-IFP-75 has POF-TJHOBMJOH line circuit (SLC) loop for
connecting addressable detectors, which can support 75 System
Sensor ® IDP/SK sensors and 75 IDP/SK modules or 75 Hochiki® SD
devices per loop. 5IF-UPUBM-QPJOU-DBQBDJUZ-GPS-IDP BOE SK devices JT-B
maximum of 150 points per panel- 6TJOH SD devices -the UPUBM-point
capacity JT a maximum of 75 points per panel.
5IFIFP-75 has the interconnection capability for up to 32 panels. The
system has two modes of operation, multiple panels covering one larger
building, or multiple independent buildings. 5IF-4,-/*$-/FUXPSL-
*OUFSGBDF-$BSE-JT-VTFE-UP-OFUXPSL-QBOFMTUPHFUIFS–Copper wire or fiber
optic cable connectivity can be used within the same networked system.
5IFIFP-75 has a built-in dual-line digital and IP communicator with an
optional cellular communication module, GormC trouble relay, and two
programmable GormC relays. 5IFIFP-75 has powerful features such as
detector sensitivity, day/night thresholds, drift compensation,
pre-trouble maintenance alert, and calibration trouble alert.
The IFP-75 supports a variety of devices, including RA-2000,
RA-1000 or RA-100 remote annunciatorT, 5824 serial/parallel
printer interface moduleT-(for printing system reports), RPS-1000 power
moduleT, and IDP, SK, SWIFT wireless or SD devices.
The IDP-CONTROL mounts directly into a 4” square electrical box. The
box must have a minimum depth of 2-1/8”. A surface mount electrical
box (System Sensor® PN SMB500) is available from Honeywell.
PHYSICAL
Overall Dimensions: 15.12”H x 12.71″W x 3.33”D
Shipping Weight: 15 lbs.
Color: Red or Black
ENVIRONMENTAL
Operating Temperature: 32°F to 120°F (0°C to 49°
C)
Humidity: 0 to 93% relative humidity (noncondensing)
ELECTRICAL:
IFP-75 Primary AC: 120 VAC @ 60 Hz, 1.5A Total
Total Accessory Load:2.5A @ 27.4VDC power- limited
Standby Current: 165mA
Alarm Current: 310mA
Battery Charging Capacity: 7 to 35AH
Battery Size: 7AH max. allowed in control panel
cabinet. Larger capacity batteries can be housed in
RBB accessory cabinet.
AGENCY LISTINGS AND APPROVALS
NFPA 13, NFPA 15, NFPA 16, NFPA 70, & NFPA 72:
Central Station; Remote Signalling; Local Protective
Signalling Systems; Auxiliary Protected Premises
Unit; & Water Deluge Releasing Service
UL -JTUFE4
CSFM: 7165-0559:0503
FDNY COA# 6248
APPROVED RELEASING SOLENOIDS
Asco T8210A107 24 VDC 3 A max 0 Hz
Asco 8210G207 24 VDC 3 A max 0 Hz
COMPATIBLE DEVICES
See the data sheets listed below for a complete
listing of the IDP, SK, SWIFT or SD devices.
350361: IDP Device Protocol data sheet
53623: SK Device Protocol data sheet
350360: SD Device Protocol data sheet
350615 & 350617: SWIFT devices data sheet
ORDERING INFORMATION
IFP-75: Intelligent Fire Alarm Control Panel. Red
Cabinet.
IFP-75B: Intelligent Fire Alarm Control Panel Black
Cabinet.
SBUS ACCESSORIES
RA-2000, RA-1000, RA-1000R, RA-100,
RA-2000GRAY: Remote annunciators
6815: Signal Line Circuit (SLC) Expander for IDP or
SK devices
5815XL: Signal Line Circuit (SLC) Expander for SD
devices
RPS-1000: Power Supply
5496: NAC Expander
5824: Serial/Parallel Module
5880: LED I/O Module
5865-3 or 5865-4: LED Annunciator
5883: Relay Interface
MISCELLANEOUS ACCESSORIES
HFSS: Software Suite. Provides programming,
upload/download and event reporting
RBB: Remote Battery Box Cabinet. Use for backup
batteries up to 35 AH. Dimensions: 16″W x 10″H x
6
SK-SCK: “D Seismic Compliance Kit
SK-NIC: Network Interface Card
SK-FML: Multi Mode Fiber Card
SK-FSL: Single Mode Fiber Card
CELL-MOD: Cellular Communicator in Plastic
Enclosure
CELL-CAB-SK: Cellular Communicator in Metal
Enclosure with lock and key
