FS-400

• Compact Design
• Advanced LED technology provides superior
current draw performance
• Lower power consumption per device allows
for more notification appliances per circuit and
reduces the need for external power supplies
• Standard and High candela settings in one unit to
meet virtually any application
– 15, 15/75, 30, 75, 110, 185 cd
• Device settings are located on the back of the
unit to prevent tampering
• Includes shorting clip that allows installers to test
the wiring before the device is installed
• Supports 12 to 22 AWG
• Mount to Mircom BB-400 surface mount back
box, single gang, 4-inch square, double gang,
octagon and 4-inch junction boxes
• All units include universal mounting plate
• Red or white finish
• For indoor applications

Download Data Sheet: CAT-5274_FS-400_Wall_Mount_LED_Strobes

Related Products:

BB-1002WP(R)A – OUTDOOR WEATHER PROTECTED ENCLOSURE
RAXN-LCDG REMOTE NETWORK ANNUNCIATOR
DSPL-420DS – MAIN DISPLAY MODULE
RAX-LCD REMOTE SHARED DISPLAY
RAX-LCD-LITE REMOTE LCD ANNUNCIATOR
RAM-3318-LCD REMOTE ANNUNCIATOR
RAM-1032TZDS-CC CONFORMAL COATED MAIN REMOTE ANNUNCIATOR
UIMA4 – INTERFACE FOR CONFIGURING MGC FIRE PANELS
INX-10A INTELLIGENT BOOSTER POWER SUPPLY
UDACT-300A DIGITAL ALARM COMMUNICATOR TRANSMITTER/DIALER MODULE
BB-1001WP(R)A – OUTDOOR WEATHER PROTECTED ENCLOSURE

Brand	mircom

Description

Mircom’s FS-400 wall mount strobes offer a visual
solution that deliver exceptional energy efficiency in a
compact design. Utilizing advanced LED technology,
the FS-400 strobes provide a lower current draw which
allows for more devices on a NAC circuit while reducing
the number of external power supplies required.
The FS-400 strobes can be field-configured for 15, 15/75,
30, 75, 110, 185 cd. The candela setting is displayed
through the front window for easy identification. The
device settings are located on the back of the unit to
prevent tampering.
The FS-400 strobes can be synchronized using a
control panel with the Mircom sync protocol or the SDM-240 synchronization module.
The FS-400 strobes utilize a universal mounting plate
that allows for mounting to a single gang, double gang,
octagon, 4” junction or 4” square electrical box. The
back plate allows the installer to mount the plate and
connect the wire connections. The device attaches to
the mounting plate and is secured by a single mounting
screw. In addition, the FS-400 can mount to the Mircom
BB-400 Series back box for surface mount applications.

Compliance

• UL 1971
• UL 1638
• ULC-S526
• NFPA 72 2016 Edition

Engineering Specifications

The strobe shall be a Mircom FS-400 notification appliance
for wall mount applications. The strobe shall be of a low
current draw design and operate at 24 VDC regulated or
full wave rectified. The strobe shall incorporate a Light
Emitting Diode (LED) as the light source and have six field
selectable settings of 15, 15/75, 30, 75, 110, 185 candela.
The candela selection shall be in a visible location. The
candela settings shall be tamper resistant. The strobe
shall be synchronized using a control panel with the
Mircom sync protocol or the SDM-240 sync module.
The strobe shall utilize a mounting plate that allows the
installer to pre-wire the mounting plate. The mounting
plate shall mount on a single gang, double gang, octagon,
4-inch square box or Mircom’s BB-400 series back box.
The strobe shall be listed to UL standard 1638, Visible
Signaling Devices for Fire Alarm and Signaling Systems
and standard 1971, Signaling Devices for the Hearing
Impaired. In addition, the strobe shall be listed to ULC
S526, Visible Signal Devices for Fire Alarm Systems.