Description
Mircom’s MS-710U Manual Station provides manual
fire reporting. This high quality, die-cast metal manual
station is a dual action unit with SPST contacts and
terminal strip connections. The normally open contact,
which closes when the manual station is activated, is
rated for 1 amp, 30 VDC. The contacts are gold plated
to avoid the risk of corrosion.
The MS-710U is available with a CAT-30 lock and
keys and mounts on a standard single gang backbox,
Mircom’s BB-700 surface metal backbox or BB-700WP
weather proof backbox.
The MS-710U Manual Station is listed for outdoor
applications when used with the BB-700WP.
Operation
The MS-710U Dual Action Manual Station is operated
by pushing the bar labelled “PUSH BAR” and then
pulling down the handle marked “PULL HANDLE”.
The MS-710U Manual Station is reset by opening the
station with the key, placing the handle in the normal
upright position and re-locking the station.
Specifications
The manual station shall be Mircom’s MS-710U.
Operating instructions shall be in raised English lettering
and the unit shall be constructed of high quality diecast metal and finished in red enamel paint to provide
quick identification. Pulling the handle shall initiate
immediate operation of the alarm detection circuit. All
manual fire alarm stations shall be installed as per the
specific requirements outlined in the UL codes, as well
as all other applicable national or local codes. Final
acceptance is subject to the local authority having
jurisdiction.
Specifications
Surface Mount Backboxes
Typical Wiring Diagram
Ordering Information
