-the headphone jack of a smartphone or tablet and opening recording apps
such as the ShurePlus MOTIV recording app, the user can easily and dis-cretely capture high-quality audio. It is ideal for use in speech and other ap -plications requiring minimal visibility.
-The Shure MOTIV MVL is an omnidirectional condenser lavalier microphone,
featuring a 3.5 mm (1/8″) Tip Ring Ring Sleeve (TRRS) plug for use with a
portable recording-capable device. By plugging the MVL microphone into
Using the Microphone
1. Install the supplied snug-fit windscreen by sliding it over the microphone capsule.
Note: Do not pull the windscreen too tightly over the microphone. Leave a small space inside the windscreen to allow for air movement.
2. Attach the microphone to a shirt or other garment using the supplied tie clip. For best results, the microphone should be 15-25 cm (6-10 in.) away from the
mouth.
3. Plug the 3.5 mm (1/8″) plug into your recording device.
To further reduce plosives and wind noise, use the optional Rycote™ Mini Windjammer, which fits over the included foam windscreen.
Specifications
Microphone Capsule
MEMS
Polar Pattern
Omnidirectional
Frequency Response
40 Hz to 20,000 Hz (see frequency response graph)
Output Impedance
350 Ω
©2018 Shure Incorporated 1/3
MVL
Omnidirectional Condenser Lavalier Microphone
Signal-To-Noise Ratio
65 dB
Maximum SPL
124 dB SPL
Dynamic Range
95 dB typical
Sensitivity
-44.0 dBV at 1 kHz (Pa=94 dB SPL)
Equivalent Output Noise
29 dB A-weighted
Microphone Connector
3.5 mm (1/8″) TRRS (Tip=No Connection, Ring1=No Connection, Ring2=Ground, Sleeve=Audio Output and Bias Voltage)
Microphone Bias
2.7 V DC through 2.2 K Ω resistor
Current Drain
245 µA, typical
Housing
Cast Zinc
Dimensions
15.2 mm x 5.5 mm x 132cm H x W x D
Cable Diameter
1.6 mm
Net Weight
with cable
8.0 g (0.282 oz.)
Accessories
Furnished Accessories
Optional Accessories
