Overview
An extensive range of interfaces are available
to support the Cooper range of UL intelligent
addressable control panels, providing
solutions for most design requirements.
The UL micro single channel input unit
(ULMCIM) is a single input, soft addressed micro
interface, incorporating integral short circuit
isolators. It is extremely compact and therefore
ideal for incorporation into other equipment.
It is designed for applications requiring the
monitoring of a set of normally open, volt free
contacts such as sprinkler system flow
switches, auxiliary panel fire/fault signals as well
as non fire input signals such as flow valve open
contacts, generator start up, fire door closed
etc.
Optional Variant
The (ULMCIM-C) is designed for use with pull
station (UMPS-100) (fast response to alarm) and
is identified by the panel as a pull station.
Therefore up to 200 can be connected to the
loop.
Benefits
• Quick and simple to install
• No hard addressing required
(Plug and play)
• Compact size
Dimensions
Mounting Details (Back-Box)
Installation
1. Fit the unit in position in accordance to the
mounting details.
2. Connect the unit according to standard
connections.
3. Up to 3 units can be fitted inside a micro
module box unit.
Operation
Normal Standby / Alarm / NAC Silenced / Alarm
Reset / Trouble / Supervisory / Drill
Technical Specification
Standard Connections
Note:
1. The end of line resistor provided must always be fitted, even if the input is unused.
2. Monitored inputs can detect open or short circuit faults.
3. Recommended loop cable type: FIRETUF, FP200, MICC.
Product Codes
